Align TB40 Helicopter TOP Combo
Standard equipment
●60A Brushless ESC x 1
●400MX Brushless Motor(1100KV/3220) x 1
●DS450M Digital Servo x 3
●DS535M Digital Servo x 1
●MICROBEAST² Flybarless System x 1
Specification
●Length: 747mm
●Height: 223mm
●Width: 103mm
●Main Blade Length: 380mm
●Main Rotor Diameter: 851mm
●Tail Length: 70mm
●Tail Rotor Diameter: 188mm
●400MX Brushless Motor(1100KV/3220)
●Motor Belt Pulley: 22T
●Drive Gear Ratio: 6.44:1:4.04
●Max RPM(approx.): 3400RPM
●Frame Weight(Batteries not included): Approx. 953g
Accessories
TB40 Kit Set x 1 set
●380 Carbon Fiber Blades x 1 set
●70 Carbon Fiber Tail Blades x 1 set
●400MX Brushless Motor(1100KV/3220) x 1
●DS450M Digital Servo x 3
●DS535M Digital Servo x 1
●60A Brushless ESC x 1
●MICROBEAST² Flybarless System x 1
Radio transmitter and electronic equipment required for assembly
●Receiver(6-channel or more)
●RCC-6CX Intelligent Balance Charger
●22.2V 6S 1850~2200mAh Li-Po Battery
●Digital Pitch Gauge
●Multi-function Tester
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
RH40E01XT |
| Weight: |
4.25 lb |
Product Spare Parts
Electronics
Customer Reviews
Great value.
This heli is amazing just like Helidirects customer service. The build is straight forward and to the point. If moneys a little tight and you want a heli that flys like the big boys, grab this Guy! I ended up dropping the MicroBeast and added a Vbar Neo, 385mm Mains, 72mm Tail with a Torq CLO604T servo (My preference, Stock gear was fine) a few hours of fine tuning and was blown away by the performance. Not to mention parts are a little cheaper. When I don't have the time to break out the Raw 700, I grab this guy and practice, practice, practice!
Cons: Microbeast (Not a fan, but will get you flying)
Servo horns (Added epoxy when screwing in the balls)
Align is always my go to when I don't want to break the bank!
I am just completing the build of the Align TB40 Helicopter TOP Combo and for the most part it is great. The problems I had were parts quality issues with the servo arms, tail gear case and missing screws. Once those were corrected by HeliDirect the build proceeded as expected.
Very nice heli. Still in the process of getting it together and can’t wait to fly it once it’s finished. It’s similar to the Align TB60 Heli but smaller.
I consider myself a beginner so I was looking for a great quality helicopter that wouldn’t break my bank account in case of crash. The best PRO of this helicopter is price and quality. Congrats Align great performing heli… buy the top combo and save with great quality servos
It's got that slow tail wag like my nimbus, I'll let everything wear in for a while. Oh, and the degrees of roll in the stock ikon is too much for a 380. Gotta find the sweet spot where I like it and it's fun.
Dude idle 1: stock 380° turned down to 240°
Still a bit too much, not where I like it. No cyclic wobble. Idle 2 & 3 were crazier. I'm still currently tuning it.
I'm running 14° of collective and whatever the max amount of cyclic I can without the servos contacting the frame. In the Ikon, I have sport, acrobatic, then 3d. As my flight characteristics profile to correlate with my 3 idle ups.
Not a fan of microbeast, put it up for consignment at my local hobby shop. Bought an ikon 2 when I purchased this kit.
I like the look of it topless, very sexy and mechanical! Not a fan of the canopy.
These servos that came with the kit, are super noisy! So noisy I thought I had bad servos.
The align blades aren't what I like. I have some azure power blades on order.
Weak points : tail servo flexes under stress. The skids/landing gear are weak, they break all the time.
I wouldn't recommend this as a first time kit, I'd recommend a m4 or the rs4. The manual is gonna be lil bit challenging for beginners, it's all in black and white; sorta makes things difficult to see where stuff goes.
Parts are cheap! That one of the main reasons I bought this kit! And it was on sale! (Memorial day sale)
This little Heli looks like it’s gonna be really nice easy to put together. Everything fits well, been real happy with. Align make great products
It's an amazing heli , would have given it 5 stars but as with all new product they still have a couple issues with quality control , and the most important part of why it didn't get 5 stars is parts availability is low. Making it less likely to be flown the way its supposed to be.
Customer Reviews
Great value.
This heli is amazing just like Helidirects customer service. The build is straight forward and to the point. If moneys a little tight and you want a heli that flys like the big boys, grab this Guy! I ended up dropping the MicroBeast and added a Vbar Neo, 385mm Mains, 72mm Tail with a Torq CLO604T servo (My preference, Stock gear was fine) a few hours of fine tuning and was blown away by the performance. Not to mention parts are a little cheaper. When I don't have the time to break out the Raw 700, I grab this guy and practice, practice, practice!
Cons: Microbeast (Not a fan, but will get you flying)
Servo horns (Added epoxy when screwing in the balls)
Align is always my go to when I don't want to break the bank!
I am just completing the build of the Align TB40 Helicopter TOP Combo and for the most part it is great. The problems I had were parts quality issues with the servo arms, tail gear case and missing screws. Once those were corrected by HeliDirect the build proceeded as expected.
Very nice heli. Still in the process of getting it together and can’t wait to fly it once it’s finished. It’s similar to the Align TB60 Heli but smaller.
I consider myself a beginner so I was looking for a great quality helicopter that wouldn’t break my bank account in case of crash. The best PRO of this helicopter is price and quality. Congrats Align great performing heli… buy the top combo and save with great quality servos
It's got that slow tail wag like my nimbus, I'll let everything wear in for a while. Oh, and the degrees of roll in the stock ikon is too much for a 380. Gotta find the sweet spot where I like it and it's fun.
Dude idle 1: stock 380° turned down to 240°
Still a bit too much, not where I like it. No cyclic wobble. Idle 2 & 3 were crazier. I'm still currently tuning it.
I'm running 14° of collective and whatever the max amount of cyclic I can without the servos contacting the frame. In the Ikon, I have sport, acrobatic, then 3d. As my flight characteristics profile to correlate with my 3 idle ups.
Not a fan of microbeast, put it up for consignment at my local hobby shop. Bought an ikon 2 when I purchased this kit.
I like the look of it topless, very sexy and mechanical! Not a fan of the canopy.
These servos that came with the kit, are super noisy! So noisy I thought I had bad servos.
The align blades aren't what I like. I have some azure power blades on order.
Weak points : tail servo flexes under stress. The skids/landing gear are weak, they break all the time.
I wouldn't recommend this as a first time kit, I'd recommend a m4 or the rs4. The manual is gonna be lil bit challenging for beginners, it's all in black and white; sorta makes things difficult to see where stuff goes.
Parts are cheap! That one of the main reasons I bought this kit! And it was on sale! (Memorial day sale)
This little Heli looks like it’s gonna be really nice easy to put together. Everything fits well, been real happy with. Align make great products
It's an amazing heli , would have given it 5 stars but as with all new product they still have a couple issues with quality control , and the most important part of why it didn't get 5 stars is parts availability is low. Making it less likely to be flown the way its supposed to be.